Torque range: Direct installation: 1000- 40,000 N; EM+YX-XT: 11.5-217KN (optional)
Shell material: Hard aluminum alloy in compliance with GB/T 1173 standard
Position indicator: LCD liquid crystal display shows continuous position changes. It can also be displayed in the event of a power failure. (Optional
Qualification certificates: ATEX, SIL3, CU-TR of the Customs Union, CE of the European Union, CCC certification
Sealed protection: IP67 (0.5m/0.5h), IP68 (2m/2h) (optional)
Anti-corrosion protection: The standard color is Porsche Grey (similar to RAL9007), and the anti-corrosion grade is WF2
Ambient temperature: Standard: Intelligent integrated type (-25℃ to +70℃), low temperature: Intelligent integrated type (-40℃ to +60℃)
Working mode: S2-15 minutes, S2-30 minutes, S4-25%, S4-50%.(Please specify when inquiring.)
Travel: 16-100mm, other travel options available
Torque switch: On/Off,SPDT,250V AC 5A
Feedback instructions: 6 groups of switch signals, capacity: 250Vac/5A or 30VDC/5A
One set of analog signal DC4-20mA, maximum impedance: 750Ω
Input instructions: 4 groups of switch quantity instructions. Signal capacity: 24VDC-109% to +30%, maximum 30mA
Control power supply: DC/AC24V,AC220V or passive contacts
One set of analog signal DC4-20mA, maximum impedance: 250Ω
Valve position acquisition: Multi-turn magnetic control absolute value encoder
Bus control: Single-channel Modbus RTU(RS-485), dual-channel (optional)
Self-locking device: The worm gear and worm mechanism and the screw nut provide double self-locking
Output flange: The bottom installation dimensions comply with the ISO5210 international standard
Output shaft: The actuator and the valve are connected to the valve stem through a detachable opening and closing nut on its lead screw nut
Smooth: Maintenance-free special high-grade lubricating grease
Manual operation: Mechanical clutch mechanism
Handwheel: Reliable, labor-saving and compact.
Motor power supply: Standard: 220V AC 1Phase(low torque),380V AC 3Phase,50HZ,±10%
Optional: 400-690V AC 3Phase,50/60Hz,±10%
Motor: Squirrel-cage asynchronous motor, insulation class H, temperature resistance 180℃
Failure protection/operating temperature: Built-in thermal protection, on/off 130℃±5℃
Space heater: 30W(220V AC) anti-condensation. (Optional)
Cable connection holes: Double-sealed three cable connection holes (1*1NPT+2*3/4NPT), and additional 2*1NPT+2*3/4NPT or other interfaces can also be added (optional)
Shell material: Hard aluminum alloy in compliance with GB/T 1173 standard
Position indicator: LCD liquid crystal display shows continuous position changes. It can also be displayed in the event of a power failure. (Optional
Qualification certificates: ATEX, SIL3, CU-TR of the Customs Union, CE of the European Union, CCC certification
Sealed protection: IP67 (0.5m/0.5h), IP68 (2m/2h) (optional)
Anti-corrosion protection: The standard color is Porsche Grey (similar to RAL9007), and the anti-corrosion grade is WF2
Ambient temperature: Standard: Intelligent integrated type (-25℃ to +70℃), low temperature: Intelligent integrated type (-40℃ to +60℃)
Working mode: S2-15 minutes, S2-30 minutes, S4-25%, S4-50%.(Please specify when inquiring.)
Travel: 16-100mm, other travel options available
Torque switch: On/Off,SPDT,250V AC 5A
Feedback instructions: 6 groups of switch signals, capacity: 250Vac/5A or 30VDC/5A
One set of analog signal DC4-20mA, maximum impedance: 750Ω
Input instructions: 4 groups of switch quantity instructions. Signal capacity: 24VDC-109% to +30%, maximum 30mA
Control power supply: DC/AC24V,AC220V or passive contacts
One set of analog signal DC4-20mA, maximum impedance: 250Ω
Valve position acquisition: Multi-turn magnetic control absolute value encoder
Bus control: Single-channel Modbus RTU(RS-485), dual-channel (optional)
Self-locking device: The worm gear and worm mechanism and the screw nut provide double self-locking
Output flange: The bottom installation dimensions comply with the ISO5210 international standard
Output shaft: The actuator and the valve are connected to the valve stem through a detachable opening and closing nut on its lead screw nut
Smooth: Maintenance-free special high-grade lubricating grease
Manual operation: Mechanical clutch mechanism
Handwheel: Reliable, labor-saving and compact.
Motor power supply: Standard: 220V AC 1Phase(low torque),380V AC 3Phase,50HZ,±10%
Optional: 400-690V AC 3Phase,50/60Hz,±10%
Motor: Squirrel-cage asynchronous motor, insulation class H, temperature resistance 180℃
Failure protection/operating temperature: Built-in thermal protection, on/off 130℃±5℃
Space heater: 30W(220V AC) anti-condensation. (Optional)
Cable connection holes: Double-sealed three cable connection holes (1*1NPT+2*3/4NPT), and additional 2*1NPT+2*3/4NPT or other interfaces can also be added (optional)
